close

Watchismo Times | category: innovation | (page 3 of 4)

home

Watchismo Times

THE WATCHISMO TIMES WATCH BLOG A reliquary of obscure timepieces from bygone eras as well as the cutting-edge watch designs of today.

watchismo.blogspot.com

Haute Steampunk! Attack of the Horological Machine No.2

Haute Steampunk! Attack of the Horological Machine No.2An exciting evening out on the town for the reclusive Watchismo Times! I had the honor of meeting Maximilian Büsser and his new child, the Horological Machine No.2! And for some strange reason, Max trusted me enough to hold his bolted baby even though I almost dropped it into the Bolognese sauce...

Personally, I think he just pulled it out of an antique alien submarine control panel and put a strap on it.

Haute Steampunk! Attack of the Horological Machine No.2After decades learning and conforming to the rules of corporate watchmaking, Maximilian Büsser broke the chains and started a rebellion - a rebellion called MB&F.

MB&F is an artistic and micro-engineering concept laboratory in which changing collectives of independent horological professionals are assembled each year to design and craft radical Horological Machines.

The ramifications of these audacious projects are profound. By respecting tradition without being shackled by it, MB&F acts as a catalyst in fusing traditional high-quality watchmaking with cutting-edge technology and avant-garde three-dimensional kinetic sculpture.

MB&F's first timepiece, Horological Machine No.1, wrote the first chapter in the story of the revolution, Horological Machine No.2 continues the adventure.

Haute Steampunk! Attack of the Horological Machine No.2Each of HM2's twin portholes allows the viewer a different perspective of time. On the right, the Jumping Hours and Concentric Retrograde Minutes reveals time up close and 'now', while the Retrograde Date and Bi-Hemisphere Moon Phase on the left dial allows the viewer to take a step back from immediacy and relax.

Haute Steampunk! Attack of the Horological Machine No.2Horological Machine No.2 (HM2) is a holistically conceived and engineered three-dimensional timekeeping machine for the wrist. The functions and indications were specifically conceived to tailor to the strengths of HM2's chief watchmaker, Jean-Marc Wiederrecht. The bespoke architecture of the highly technical movement was developed to both fit and complement the radical form of the modular case. HM2 is the world's first mechanical movement offering: Instantaneous Jump Hour, Concentric Retrograde Minutes, Retrograde Date, Bi-Hemisphere Moon Phase and Automatic Winding.

With over 450 components making up its case and movement HM2 is an incredible sophisticated machine; however, its complexity has been engineered for simple and trouble free functionality.

The movement features an extremely energy efficient Jump Hour/Retrograde mechanism developed by Jean-Marc Wiederrecht. Wiederrecht's exclusive (and patented) asymmetrical-tooth gear wheels ensure high precision and play-free functionality.

The realisation of HM2’s complex case shape - with its architectural volume, bold flying buttresses, bolted portholes and sliding crown guard - was only made possible by using an innovative modular approach: a method inspired by the Meccano sets (similar to Erector sets) of Maximilian Büsser's childhood.

Horological Machine No.2 is full of dynamic tension between apparently incongruous elements. Tension between cutting-edge technology and sculptural art, matte textures and mirror-polishes, high-tech alloys and precious metals and tension between traditional watchmaking and 21st century micro-engineering. This vibrant tension is amplified by the interplay of light and colour off the varied finishes, textures and shapes, and gives the machine its pulsing vitality.

Haute Steampunk! Attack of the Horological Machine No.2
Inspiration and Realization: MB&F is first and foremost about people and the key person behind Horological Machine No.2 is Jean-Marc Wiederrecht. It was 9 years ago, in Maximilian Büsser's former position as Managing Director of Harry Winston Timepieces, that Büsser first began working with Wiederrecht and found him to be imaginative, inventive and sharing in the same human values. Wiederrecht and his company Agenhor are world leaders in Retrograde and Jumping Hour mechanisms and Büsser conceived HM2's functions specifically to play to these strengths.

The case, with its flying buttresses, bolted portholes and sliding crown guard, was so complex - over 100 components go into its construction alone - that it could only be developed with an innovative modular method inspired by the Meccano sets of Maximilian Büsser's childhood. And in line with best engineering principles, this modularity also simplifies future refurbishment of the case should it ever be necessary.

Haute Steampunk! Attack of the Horological Machine No.2Architecture: The principal feature of Horological Machine No.2 is the holistic symbiosis between the three dimensional architecture of both the case and the movement. The sheer complexity of the case design necessitated a modular approach to construction. More than 100 components go into the assembly of the case alone - that is more parts than make up many complete movements! While extremely complex to fabricate, this bolted-not-welded engineering allows maximum flexibility in design and enables a rich variety of materials and finishes to be used.

Haute Steampunk! Attack of the Horological Machine No.2Technical Innovations: The principle technical challenge in developing the movement was ensuring that the jumping hour functioned both instantaneously and simultaneously when the retrograde minute flies back from 60 to 0. And not only instantaneously, but also without using excessive energy. The usual method of activating Jumping Hour indications is to store energy in the minutes before the change to power the jump; however, while this energy is being accumulated it takes power from the balance causing it to loose amplitude - an effect detrimental to time-keeping precision. Wiederrecht's solution was as brilliant as it was simple: he designed a ingenious mechanism so that when the minutes fly back, a snail on the minute mechanism hits the hour star causing the hour to jump. The hour jumps instantaneously with the minutes because it is triggered by the minutes and, as the jump is powered by the energy of the minutes flying back, it has virtually no effect on the amplitude of the balance.

Haute Steampunk! Attack of the Horological Machine No.2The complication has another very special feature. Specific gears in HM2's movement are manufactured to extremely high precision using Mimotec's UV-LIGA technology. These gears mesh together with a virtually a no-tolerance/no-play engagement. Normally, gears interacting this tightly would bind; however, Wiederrecht's patented asymmetrical-split-tooth gear design ensures this does not occur. The high precision of this gearing enables very accurate time-setting and offers high reliability.

To maximise the efficiency of MB&F's already iconic double Hakken automatic rotor, one of the 22kt gold blades was machined down to a razor sharp edge of just 0.2mm - a dimension which pushed the very limits of micro-machining.

The innovative sliding crown guard clearly indicates its position (in or out) and facilitates access to time-setting and quick date correcting.

And now for some candid shots of the new brood. (photographed by and courtesy of Felipe Jordão, the independent horology moderator at Timezone.com - all his photos can be seen here-->Link

Haute Steampunk! Attack of the Horological Machine No.2The MB&F Clan (HM1 & HM2)

Haute Steampunk! Attack of the Horological Machine No.2
Haute Steampunk! Attack of the Horological Machine No.2
Haute Steampunk! Attack of the Horological Machine No.2
Haute Steampunk! Attack of the Horological Machine No.2What watch do I wear to such an event?
Well, my cuffbusting vintage Desotos

Haute Steampunk! Attack of the Horological Machine No.2Max, Watchismo, and the HM2

Priced at $59,000 (US) and in larger editions than the $150,000 HM1.

MB&F website-->LINK

All MB&F related posts-->LINK

Want more? Jack Forster's HM2 article for Horomundi-->LINK



| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

The 1000 Year Forest Clock - The TiWalkMe Escapement


TiWalkMe is a 1000 year clock in the guise of a forest, with annual tree plantings setting the pace of time, and their maturing the clockwork mechanism. TiWalkMe's purpose is to make deep time visible, and thus to help individuals and society focus on those hard, long term problems which determine our success as a species.

Over the next millennia, the TiWalkMe Escapement will constantly move and bow to the winds of time. Sections age, others regrow, and above all, change is embraced. Details must be left to future generations, but this generation will locate the site, etch the overall plan of paths and trees, and set the clock into motion. Never the less, throughout time three principles should guide its evolution:
  • Principle 1: The slow march of trees across the Escapement must always be visible and unobstructed.

  • Principle 2: The Escapement must adapt to future knowledge and needs, yet remain balanced with the past.
  • Principle 3: TiWalkMe's mission is to bring perspective and insight to its visitors.

Bell & Siphon

Rather than a static network of ponds and streams, the Escapement's pools empty periodically into the stream below. Although pumps or other massive infrastructure could be used to force water across each dam, TiWalkMe will adapt a passive, gravity-powered "bell and siphon" to echo nature's grand cycle. Yet the flow will be as dramatic and as willful as nature's own.

The most elegant and efficient pump in the world is a siphon. Containing no moving parts, requiring no forces other than gravity and surface tension for operation, siphons are at work everyday emptying gas tanks, filtering aquariums, and moving drinking water from reservoir to town. More about the Bell & Siphon system-->Link


Overhead view
More on the design-->Link

Conceptualized locations include larger rural or even smaller scale urban settings. The search continues for funding, volunteers, and site selection.

The interesting man behind the TiWalkMe is inventor, physicist, entrepreneur, designer, former Bell Labs chief scientist, and now venture capitalist Greg Blonder of Genuine Ideas. A mad genius of over 70 patents and thousands of other genuine ideas.

After exchanging some emails with Greg, he summed it up nicely for me...

"My main point is captured by Yogi Berra, who famously noted "you can see a lot just by looking". Imagine walking though the forest in the first year, then the second and third. And tenth with your children. Slow down- think- visualize the paths and leaves in your mind.... What will have changed? What risks are a forest like this likely to face from the ravages of nature, visitors, insects? How can one plan and organize to keep the forest safe and a legacy for future generations? Understand the forest, and you will exercise the very same skills we need to develop to solve challenges never before faced in all of human history.

Realistically, as I've searched for an appropriate site and sponsor, they either specify a conventional park, or a conventional business district with mixed use facilities and homes. Short term thinking, of course. A city which embraced the TiWalkMe forest will become a magnet for associated organizations, and then businesses and jobs. Plus, unlike a woollen mill or high tech park, its base will not migrate away. But few visionaries are in power, I'm afraid."

TiWalkMe Website-->Link


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

Horological Peephole! First Peek of the HM2 by Maximilian Busser & Friends

Horological Peephole!  First Peek of the HM2 by Maximilian Busser & FriendsSure, I feel guilty looking at the HM2 in a very private moment. But I just can't help myself, it's a damn nice looking watch!

Within a week of being publicly exposed in full-frontal glory, the MB&F "Horological Machine N°2" can only be seen with these advance elemental photographs. Showing the crown (with the iconic HM2 "battle axe" rotor design on it), a portion of one display and at least two indications, and what appears to be some sort of bad-ass futuristic motorcycle engine! We shall see...stay tuned.

The case alone is made up of 102 different coponents, setting itself as one of the most, if not THE most complex watch cases ever made. Max mentioned to me that the case construction is inspired by a game he used to play as a kid… called Meccano, where parts are bolted together (similar to Erector sets).


Horological Peephole!  First Peek of the HM2 by Maximilian Busser & FriendsPerhaps a grip for your thumb to adjust the crown?

Horological Peephole!  First Peek of the HM2 by Maximilian Busser & FriendsCrown with HM1 "Battle Axe" Rotor Design

Horological Peephole!  First Peek of the HM2 by Maximilian Busser & FriendsThe entire sneak preview - Next week!

All Related MB&F Post Links;
MB&F HM2 Friends Photo
MB&F HM2 Movement
Max Busser Interview
Early Designs & Sketches of the HM1
Horological Machine No 1



Enter The Watchismo Times 1st anniversary vintage chronograph giveway!-->LINK


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

10....9....8....7....6....5....4....3.....HM2!

10....9....8....7....6....5....4....3.....HM2!It's just about blast-off time for the next Horological Machine of Maximilian Büsser & Friends. Max has just sent me the official team portrait (a new crew is assembled for each machine) and as many of you know, this is the second landing for the the MB&F brand and we're all less than a two weeks away from seeing their craft!

Yeah, way too many space travel references, I know. But you gotta admit, the HM2 does look other-worldly, based solely on the advance viewing of the movement a while back. Still, nobody really understands where this might be going. (see the HM2 movement below) One thing is certain, the HM2 is likely to wear you, not the other way around.

And nobody really knew who he was working with on this latest project...until now. Max described it as "A truly incredible adventure with a wonderful team. Few of these great artisans-creators have had any media limelight at all, even Jean-Marc Wiederrecht who is probably the most prolific movement creator of the last fifteen years, but who is so shy of publicity that the biggest problem was to convince him to appear openly on this project, has rarely been seen at all!"

10....9....8....7....6....5....4....3.....HM2!Watchmaker Jean-Marc Wiederrecht, Designer Eric Giroud, and Captain Max

10....9....8....7....6....5....4....3.....HM2!HM2 Movement

Read more about the reclusive watchmaker Jean-Marc Wiederrecht here-->Link
Maximilian Busser & Friends website-->Link

Related Posts;
HM2 Movement
All other MB&F posts



Enter The Watchismo Times 1st anniversary vintage chronograph giveway!-->LINK


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

The Cloud Clock of Grindell "Death Ray" Matthews

The Cloud Clock of Grindell From the 1933 issue of Popular Science;

LIGHT PRINTS TIME ON CLOUDS

Once engaged in the development of a death ray for possible military use, H. Grindell-Matthews, British inventor, has developed a new gun for projecting light rays. A motor carriage supports the cannon-like projector, which is designed to throw signs upon clouds miles away, and is an improved model of one he demonstrated in New York City not long ago. By inserting a special clock with a transparent face and opaque hands and figures in the projector, the correct time is also thrown on clouds.

Grindell Matthews was most infamously known for his incredible (so-called) inventions like an aeronautical wireless phone in 1911 and a airplane dropping death ray in 1924. He was a visionary as much as he was a charlatan. Actually, his first real invention was huge...The first talking film in 1921 (years before Hollywood). Sadly, the British film industry told him the "talkies" would never catch on. Karma is a bitch.

This Cloud Clock, looking more like an actual death ray machine, was part of his Sky Projector invention. Casting images of everything from angels and American flags in the sky, the potential for advertising never caught on for this project and his company went bankrupt soon after.

Learn much more about Grindell Matthews controversial inventions and history here-->Link


The Cloud Clock of Grindell April 1933 Popular Science featuring the Cloud Clock

The Cloud Clock of Grindell Grindell Matthews

The Cloud Clock of Grindell The Sky Projector

via Modern Mechanix and Fortean Times


Enter The Watchismo Times 1st anniversary vintage chronograph giveway!-->LINK


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

New Photos of the Breguet Tradition 7047 Fusee Tourbillon

I've been waiting to see more invasive photographs of the fusee and chain mechanism of the Breguet Tradition 7047 Tourbillon and am happy to direct you to Watching Horology where that feat has been captured in great detail-->Link

"The second of this year's remarkable tourbillons from Breguet is the La Tradition Tourbillon, which extends the tourbillon as an art form both forwards into the future and which also reaches backwards in time, incorporating one of the rarest horological complications of them all- the fusee and chain."

"Fusees in clocks and pocket watches were not great rarities but in the wristwatch they are virtually unheard of, and a combination of the fusee and tourbillon is almost unknown. Lange & Sohne has presented fusee and chain wristwatches with the tourbillon, and more recently there is the Vianney Halter Cabestan, but the Breguet La Tradition Tourbillon is a totally unique experience aesthetically."

From the very informative article by Jack Forster of Horomundi-->Link


Related Posts;
Production Cabestan-->Link
Prototype Cabestan-->Link
All Tourbillon-->Link
All Breguet Related-->Link

Enter The Watchismo Times 1st anniversary vintage chronograph giveway!-->LINK


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner



The FREAK(s) of Ulysse Nardin

There is no dial, there are no hands, there is no crown, and the movement itself rotates to tell the time. One of the more important developments in the history of watchmaking, the Ulysse Nardin Freak is definitely a new mechanical breed. It's as if the watchmakers lived on The Island of Doctor Moreau. One of the earlier mustations (2003's No.339) is being offered at auction next week-->Link

As explained by HH, "The concept was a technical tour de force, requiring the combined efforts of three of watchmaking’s most renowned engineers. The arrangement of parts was inconceivably unorthodox - it has essentially no true case! The crystal and the bezel are actually part of the movement; the Freak has no crown, no hands and the movement pivoted to indicate time."

No. 339 Freak

And most recently, Ulysse Nardin developed the 'InnoVision' Freak (below). Improving breakthroughs with more extensive use of the light flexible material silicium throughout the movement and 96 non-lubricated ball bearings guide the barrel both vertically and laterally, in fact, the entire watch is now oil/coating/lubrication free.


A chart of the 10 innovations of the InnoVision Freak

If you'd like to attempt a deeper understanding of this wormhole of complexity, continue reading in depth articles here-->Horomundi and-->The Purists or download the PDF's at the Ulysse Nardin's website-->Link

The Freak is the brainchild of Dr. Ludwig Oechslin, as interpreted by Ulysse Nardin's research and production team. "The Freak" is a tourbillon of 7-day duration, without hands or winding crown. In most tourbillons, the balance wheel assembly rotates once per minute in a cage. In the "Freak", the whole movement rotates once per hour, the drive wheel meshing with teeth around the whole circumference of the dial, a similar arrangement mounted below driving the hour wheel. The mainspring is located underneath the movement and spans the entire diameter of the case. The extra large size of the mainspring provides the watch with a power reserve of one week. Winding is accomplished by turning the back of the case anticlockwise. The “Dual Direct Escapement” invented by Dr. Ludwig Oechslin, astronomer, mathematician and master watchmaker. Among his many inventions for Ulysse Nardin are the "Perpetual Ludwig" and the "Trilogy" of astronomical wristwatches. The “Dual Direct Escapement” consists of 2 impulse wheels transmitting the energy directly to the balance wheel; they each rotate in the same direction and connect alternately with the balance. Using the technology of the CSEM (Centre Suisse d'Electronique et de Microtechnique), the 2 wheels at the center of the “Dual Direct Escapement” are plasma-engraved out of single-crystal silicon, the material from which computer chips are made. This technique offers the greatest hardness coupled with low weight."

Source - Antiquorum

Released earlier this year, the "The FREAK DIAMonSIL® in platinum is the first timepiece sporting a synthetic nanocrystal diamond escapement grown on a silicium raw part." (source -> HH)

Ulysse Nardin website-->Link


Be sure to enter The Watchismo Times 1st anniversary vintage chronograph giveway!-->LINK





| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

Off With Your Hands! The First Digital Clocks

Off With Your Hands!  The First Digital ClocksA collection of rare historical timepieces is now on show at the premises of A. Lange & Söhne. Entitled “From Dresden to Glashütte – the roots of precision watchmaking in Saxony”, the exhibition features selected clocks and pocket watches from the “Mathematisch-Physikalischen Salon” collection.

These ingenious timepieces by prominent names like Seyffert, Schumann and Gutkaes, chronicle the history and evolution of the watchmaking industry in Glashütte. The highlight of the exhibition is undoubtedly a model of the “Five-Minute Clock” above by Hofuhrmacher Ludwig Teubner, one of the earliest versions of a digital display. The hours are Roman numerals and the minutes are five minute increment digits.


via Goldarths Review

Off With Your Hands!  The First Digital Clocks
According to A. Lange & Söhne, this was the original digital clock. Built for Dresden's Semper Opera in 1841 by Friedrich Gutkaes and Adolph Lange, and is conveniently legible from all seats in the house.

Off With Your Hands!  The First Digital Clocks
A. Lange & Söhne History-->Link


Be sure to enter The Watchismo Times 1st anniversary vintage chronograph giveway!-->LINK

Find other clocks here
Search for watches


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

Fitting In and Out - Rare Expanding & Contracting Hand Watches

Fitting In and Out - Rare Expanding & Contracting Hand WatchesIn my collecting history, I always had a special place for oblong, oval, rectangular, thin, or just very wide watches. The problem they all share is the restriction of their hands being only as long as the shortest width of the dial. Once the hands reach their widest points, they often appear too dwarfed. It got me thinking, how cool would it be if hands of a watch could extend out as the width of the watch gets wider and contract back to the smallest? Well, lo and behold, I discovered nearly everything has been done before at some point in time. Expanding and contracting hand history was sporadic and only a few were ever made.

Fitting In and Out - Rare Expanding & Contracting Hand Watches
This fantastic specimen circa 1795, made by watchmaker William Anthony of London. Famous for his verge watches with many being made for the Chinese market. His watch above features hands that work like a pantograph or scissors that follow cams to expand and contract. Valued conservatively between $100,000-$250,000.

via 2007 Complete Price Guide to WatchesFitting In and Out - Rare Expanding & Contracting Hand Watches


Fitting In and Out - Rare Expanding & Contracting Hand WatchesClose-up of William Anthony 'Scissorhands'

Fitting In and Out - Rare Expanding & Contracting Hand WatchesNow, go back nearly 120 years before that and you have this watch by Henricus Jones above, circa 1678. Featuring a minute hand that expands and contracts - always pointing to the outer edge of the oval chapter ring. Also one of the earliest watches with a balance spring.

Via Patek Philippe Museum

Fitting In and Out - Rare Expanding & Contracting Hand WatchesOk, flash forward almost 350 years later (today) and you'll see an ingenious recurrence of this concept. The Urwerk 201 Hammerhead. One of the most cutting edge watch brands today have not only revived and modernized the wandering hour watch, but also reinventing the expanding and retracting hand by placing a telescopic pointer inside the hour cubes. As each cube rotates to the corresponding minute display, the protuberance slowly extends and retreats.
(Again, I'm always trying to find a way for the word "protuberance" to appear in my posts)

Fitting In and Out - Rare Expanding & Contracting Hand WatchesUrwerk Telescopic Pointer

Related Posts;
All Pocket Watches



Search for watches

| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

Fitting In and Out - Rare Expanding & Contracting Hand Watches

Fitting In and Out - Rare Expanding & Contracting Hand WatchesIn my collecting history, I always had a special place for oblong, oval, rectangular, thin, or just very wide watches. The problem they all share is the restriction of their hands being only as long as the shortest width of the dial. Once the hands reach their widest points, they often appear too dwarfed. It got me thinking, how cool would it be if hands of a watch could extend out as the width of the watch gets wider and contract back to the smallest? Well, lo and behold, I discovered nearly everything has been done before at some point in time. Expanding and contracting hand history was sporadic and only a few were ever made.

Fitting In and Out - Rare Expanding & Contracting Hand Watches
This fantastic specimen circa 1795, made by watchmaker William Anthony of London. Famous for his verge watches with many being made for the Chinese market. His watch above features hands that work like a pantograph or scissors that follow cams to expand and contract. Valued conservatively between $100,000-$250,000.

via 2007 Complete Price Guide to WatchesFitting In and Out - Rare Expanding & Contracting Hand Watches


Fitting In and Out - Rare Expanding & Contracting Hand WatchesClose-up of William Anthony 'Scissorhands'

Fitting In and Out - Rare Expanding & Contracting Hand WatchesNow, go back nearly 120 years before that and you have this watch by Henricus Jones above, circa 1678. Featuring a minute hand that expands and contracts - always pointing to the outer edge of the oval chapter ring. Also one of the earliest watches with a balance spring.

Via Patek Philippe Museum

Fitting In and Out - Rare Expanding & Contracting Hand WatchesOk, flash forward almost 350 years later (today) and you'll see an ingenious recurrence of this concept. The Urwerk 201 Hammerhead. One of the most cutting edge watch brands today have not only revived and modernized the wandering hour watch, but also reinventing the expanding and retracting hand by placing a telescopic pointer inside the hour cubes. As each cube rotates to the corresponding minute display, the protuberance slowly extends and retreats.
(Again, I'm always trying to find a way for the word "protuberance" to appear in my posts)

Fitting In and Out - Rare Expanding & Contracting Hand WatchesUrwerk Telescopic Pointer

Related Posts;
All Pocket Watches



Search for watches

| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

Haute Steampunk! Attack of the Horological Machine No.2The 1000 Year Forest Clock - The TiWalkMe EscapementHorological Peephole!  First Peek of the HM2 by Maximilian Busser & Friends10....9....8....7....6....5....4....3.....HM2!The Cloud Clock of Grindell "Death Ray" MatthewsNew Photos of the Breguet Tradition 7047 Fusee TourbillonThe FREAK(s) of Ulysse NardinOff With Your Hands!  The First Digital ClocksFitting In and Out - Rare Expanding & Contracting Hand WatchesFitting In and Out - Rare Expanding & Contracting Hand Watches

Report "Watchismo Times"

Are you sure you want to report this post for ?

Cancel
×