close

Watchismo Times | category: urwerk

home

Watchismo Times

THE WATCHISMO TIMES WATCH BLOG A reliquary of obscure timepieces from bygone eras as well as the cutting-edge watch designs of today.

watchismo.blogspot.com

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour DisplayI started this blog nearly three years ago and the watch that started it all was the very obscure 1958 Patek Philippe Cobra -- A timepiece so advanced for its time, only one prototype was ever produced.

It has taken over half a century for someone to take it seriously and attempt a reinterpretation -- Urwerk, the coolest independent brand in the world has just introduced the "King Cobra UR CC1", an unexpected follow-up to their revolutionary Tarantula and Hammerhead series and a serious nod to the masterpiece originally created by Louis Cottier.

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display
Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display
Geneva – September 2009

Time is usually - nearly always - displayed by a circular indication: one dial and two (or three) with the time displayed around a perpetual circle. However, this 360° representation of time goes against everything we learnt as we grew up drawing a straight line on a blank page and marking it Past, Present and Future. Why do we think of time as travelling in a straight line yet display it rotating around a circle? The answer is straightforward: mechanisms that continually rotate are much simpler to produce than those that trace a straight line then return to zero. In fact, the latter is so difficult that, until now, nobody has ever managed to develop a production wristwatch with true retrograde linear displays.

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour DisplayLinear. On the UR-CC1, there are two horizontal indications displayed by two retrograde cylinders: one for the (jumping) hours, the other for the minutes. And don't be lulled by the apparent simplicity of the displays; the UR-CC1 is the result of more than three years of research, development, production and testing to ensure that the rotation and instant fly-back of the large hour and minute cylinders was achieved without compromising accurate timekeeping.

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display
Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display
Triple-cam. A vertical triple-cam operating a rack (visible through a window in the side of the case) rotates the minute cylinder. From zero to 60 minutes, the minute cylinder rotates through 300°. On arriving at the 60-minute mark the cylinder instantly (1/10th of a second) reverses back to its original position thanks to an extra-flat linear spring. The retrograde movement of the minute cylinder triggers the hour cylinder to advance (jump) one complete hour.

The triple-cam is crafted from bronze beryllium, a metal selected for its inherently self-lubricating properties and low co-efficient of friction, and takes the form of three small inclines. The precise shape of the curve of the incline is relayed to the pivoting rack, while the teeth on the end of the rack mesh with and rotate the minute cylinder. The triple-cam makes a complete rotation in three hours so that each of the three inclines takes 60 minutes, and 180 points of reference have been calculated on each of the three cams to ensure the precise and isochronic rotation of the minute cylinder.

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour DisplayRack: The toothed segment at the end of the rack transmits and transforms the rotation triple-cam into the rotation of the minute cylinder. The toothed rack presents two properties that at first appear contradictory: absolute rigidity, so as to accurately transmit the motion of the cam to the minute cylinder; and extremely low mass to consume as little energy as possible and minimise the effects of gravity and accelerations/shocks. This vital component has been fabricated in nickel by Mimotec using their photolithography process. The honeycomb pattern of the nickel structure resolves the two apparently contradictory requirements of maximum strength and minimum weight.


Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display
Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display

Seconds disk: The dial of the UR-CC1 is animated by a rotating disk displaying the seconds both digitally and linearly – a world first! This incredible exploit was achieved thanks to Mimotec’s photolithography production technique, which enabled the component to be fabricated from ultra-light nickel; the procedure is even more precise than electro-erosion. To reduce mass to an absolute minimum, the minuscule numerals were even skeletonised. A small tab at 10 seconds bearing the URWERK logo precisely counterbalances the disk's single-digit numbers. This marvel of micro-precision weighs only 0.09 grams.

Rotor Fly Brake: UR-CC1 features URWERK’s pneumatic shock-absorbing Rotor Fly Brake automatic winding system, which minimizes rotor and mechanism wear and damage from shock and harsh movements. The operation of the Rotor Fly Brake is visible through a window on the side of the case.

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour DisplayTechnical Specifications:

Model: UR-CC1

Case: available in either grey gold with titanium case back (limited edition of 25 pieces) or black gold with titanium case back (limited edition of 25 pieces); brushed-satin finish

Movement: calibre UR-CC1; automatic winding regulated by “fly brake turbine” pneumatic shock absorber

Indications: linear display for hours and minutes with jumping hours and retrograde minutes ; second display both digital and linear

Dimensions: 45.7mm x 43.5mm x 15mm

Dial and Bridges: ARCAP P40. SuperLumiNova treatment on hours, minutes displays

Genesis of a creation

1958. Messrs Gilbert Albert and Louis Cottier combine their talents to create a watch destined to revolutionize the horological world. Their idea is completely outrageous: it is the world’s first watch to feature a linear display. It is an extraordinary, avant-garde piece that fulfils none of the aesthetic criteria of the time. As for its linear indication, the idea may seem simple but the execution is a technical headache of monumental proportions. However Messrs Albert and Cottier believe in it and they stick with it, creating a prototype for Patek Philippe.

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display 1959. A patent is deposited by Louis Cottier, detailing the technical scale of the achievement. Then – nothing. The prototype is put on to one side. Does the watch even work? Today nobody knows for sure. It took its place in the corner of the Patek Philippe museum and proceeded to arouse curiosity from time to time.

1998. With pencil and paper Martin Frei, co-founder of the URWERK brand and an aesthete at heart, sketches the first outline of his future creation: a watch in which the hours and minutes are indicated by two straight, parallel lines. But he hesitates. With Felix Baumgartner, master watch-maker and co-founder of URWERK, another idea springs to mind – the concept of the hour satellite, presented for the first time at Basel. The earlier project is postponed, sine die.

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display 2006. URWERK is henceforth known and recognized for its mechanical hour satellite watches in which orbiting hour satellites indicate the minutes. But the idea of developing a different way of telling the time continues to fascinate Felix Baumgartner. In the end it is the Alfred Hitchcock film “The Birds” that gives him the decisive nudge in the right direction. In one of the most famous scenes from the film, the heroine seeks refuge in an old Dodge. The image lasts only a few seconds but it is crucial – a close-up of the dashboard and its linear speedometer. Yes. That’s it! A continuous line with which to mark time. Felix and Martin work non-stop on this new project. Their research leads them to the discovery of Gilbert Albert and Louis Cottier’s watch. It will be their “muse”.

2009. Three years of research. One year of testing. URWERK’s “King Cobra” is unveiled. ‘CC’ for Cottier Cobra, a homage to the genius of Louis Cottier, inventor and creator. Once more, URWERK redefines our vision of fine watchmaking and pushes back the frontiers of the possible.

The original 1958 Cobra

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display
Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display
Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour DisplayOriginal Prototype Movement

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display

Watchmaker Felix Baumgartner

I am not big on nostalgia, but I have always loved the linear speedometers found on old cars. My older brother had a 1960’s Volvo and it was that which gave us the first idea for a horological linear indication. I recently watched the film ‘The Birds’ by Alfred Hitchcock, and in it the heroine took refuge in an old Dodge with a linear speedometer- it is one of my favourite scenes. There are very few wristwatches with linear indications. One of them, if not the first, was ‘The Cobra’, which was developed in the late 1950s by Mr. Louis Cottier. It is sensational! Although it was created over half a century ago, it is still very contemporary. Unfortunately, it only exists as a single prototype and was never put into production. Now, 50 years after he filed his patent (1959), URWERK pays homage to the work of Louis Cottier by creating its own interpretation of the Cobra. -Felix Baumgartner

Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour Display

Designer Martin Frei

I am interested in the perception of time. Physicists tell us that time can be warped or stretched, and our daily experiences are with the circular cycles of the days, seasons and years. But I am also intrigued that time can be ordered, even straitjacketed, to flow in a linear direction - a straight line from the past, through the present, to the future. And, because this can represent an individual’s lifeline, I feel that this linear format can be a very human way to look at time. That plus the fact that I think it looks really cool! -Martin Frei

Additional presentation party photos by Ian Skellern of Horomundi

Urwerk Website Link


Related Posts;
Urwerk Tarantula
Urwerk Hammerhead
Urwerk TiAIN 103.08
Interview with Martin Frei
Urwerk Time Bandit
Urwerk Visit


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Urwerk Tarantula Crawls Onto Your Wrist and Sticks its Fangs Into Your Veins

Urwerk Tarantula Crawls Onto Your Wrist and Sticks its Fangs Into Your VeinsThe Urwerk Tarantula, a brand new design from the Lennon and McCartney of the watch world - actually.. correction, the Jagger and Richards since Time is on Their Side. Watchmaker Felix Baumgartner and designer Martin Frei are appropriately at the Let It Bleed of their career.

Urwerk Tarantula Crawls Onto Your Wrist and Sticks its Fangs Into Your Veins
Urwerk Tarantula Crawls Onto Your Wrist and Sticks its Fangs Into Your Veins
The ‘T’ in the 103T is at first a mystery, but only until the first look down through the massive sapphire crystal into the mechanism below. There you will sense a shape before you see it. A form slowly emerges from the orbital cross and stretches its mesmerising legs: ‘T’ for Tarantula. URWERK’s latest addition to the UR103 collection has a few genetic codes borrowed from one of the most famous members of the world of arachnids.

In the UR103T, the titanium cross has been replaced by a completely redesigned structure in ARCAP, a very stable copper/nickel alloy. The dark ARCAP wraps around the hour satellites in a protective embrace. This new configuration ensures that the numbers on the hour satellites can only be seen when they are required to tell the time while passing the arc of the minutes.
The actual mechanism for rotating the satellites has been completely modified on the UR103T. With this model the satellites rotate simultaneously behind the scenes in multiple stages, in preparation for their turn to indicate the time. They actually perform a four-beat 480° pirouette. Each satellite turns four 120° turns in the period between leaving the minute arc and arriving again with a new numeral displaying. The orbital satellite complication is over 300 times heavier than traditional hands, a factor that requires absolute precision in the manufacture of its minuscule components, and in assembling, balancing and regulating the complication to obtain an excellent chronometric performance.

Urwerk Tarantula Crawls Onto Your Wrist and Sticks its Fangs Into Your VeinsThe Time Spider

Urwerk Tarantula Crawls Onto Your Wrist and Sticks its Fangs Into Your VeinsUrwerk Tarantula's fangs reach deep into your wrist

Urwerk Tarantula Crawls Onto Your Wrist and Sticks its Fangs Into Your VeinsYou can almost see the blood dripping from the wound

Urwerk Tarantula Crawls Onto Your Wrist and Sticks its Fangs Into Your Veins
Urwerk Tarantula Crawls Onto Your Wrist and Sticks its Fangs Into Your VeinsAn early Urwerk with covered case, cool as %$#@!

Urwerk Tarantula Crawls Onto Your Wrist and Sticks its Fangs Into Your VeinsThe Maestro Baumgartner

URWERK website-->LINK

All Urwerk Posts at The Watchismo Times-->LINK


Wristshots via Horomundi


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |

Urwerk 202 Hammerhead Automatic at 2008 SIHH

From Urwerk's presentation of the new UR-202 Twin Turbine-->Link

UR202 Promotional Video-->Link

The UR-202 is the world’s first watch with the winding rate regulated by fluid dynamics.

As long ago as the 18th century, clockmakers were using air friction to regulate the speed of chiming clocks, and their techniques evolved to become the preferred method of regulating the rate of chimes on minute-repeaters.

With the UR-202, URWERK have taken the traditional idea of using air friction and refined it to control the rate of automatic winding.
The traditional rotating vanes of the past have been replaced by cutting-edge miniature twin turbines - miniature air compressors - which can be seen spinning on the back of the watch.


Urwerk turbines

The UR-202’s twin turbines are coupled with the winding rotor. According to the position of the selector lever, the turbines act as shock absorbers.
In normal activity they cushion sharp movements of the rotor. This reduces wear and increases the lifespan of the movement.
While the selector position is continuously variable, the three principal positions are: normal activity, where the turbines spin freely; vigorous activity, where the air pressure generated by the turbines reduces the winding rate by approximately 35%; and extreme activity, where the turbines and rotor are fully blocked.


The turbine system is totally self-contained within the waterproof case. The air flows from under the turbines and is channeled up past them under a sapphire plate and down through holes leading to a tiny air chamber.

The turbines are controlled by a 3-position selector switch. This functions by adjusting the level of air compression the turbines generate by selectively regulating the amount of air flowing from inside the case.

The spinning turbines force air through holes into a tiny air chamber. The selector switch controls the amount of air escaping from the turbines.
By restricting the airflow, it increases the air pressure and slows down the turbines and the winding rotor.


The UR-202 also features URWERK’s patented Revolving Satellite Complication with telescopic minutes hands.

The Revolving Satellite Complication displays time using telescopic minutes hands operating through the middle of three orbiting and revolving hours satellites. The telescopic minutes hands precisely adjust their length to follow the three sectors marking the minutes: 0-14, 15-44, 45-60.

Extended, they enable the UR-202 to display the time across a large, easy-to-read dial. Retracted, they allow for a very wearable and comfortably sized case.


Photo->Link


Related Posts;
ALL URWERK STORIES-->Link

See Also;
Urwerk Website->Link
Ian Skellern's (R)Evolution of Urwerk->Link
Horomundi's Complete Urwerk Story->Link



Urwerk's first model, the Nightwatch Wandering Hour



| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

Long Lost Urwerk Relative? A 1970 Jump Hour with very familiar features

Long Lost Urwerk Relative?  A 1970 Jump Hour with very familiar featuresThe contemporary brand Urwerk creates some of the most phenomenally complex and understandably expensive watches today but when finding this beat-up rare vintage jump hour from the seventies, it only made me think of their wandering hour designs, especially their Hammerhead, and cost me $50,000 less! It'll satisfy me for about a week.

Someday Mr. Baumgartner, someday...

Long Lost Urwerk Relative?  A 1970 Jump Hour with very familiar features
Long Lost Urwerk Relative?  A 1970 Jump Hour with very familiar featuresNot wandering, retrograde or even protracting hands, just a simple semi-sideviewing jump hour digital display with a low grade manual winding movement.

Long Lost Urwerk Relative?  A 1970 Jump Hour with very familiar featuresYou gotta admit, DNA tests might prove some relation. Especially the chin and lips.

Long Lost Urwerk Relative?  A 1970 Jump Hour with very familiar features
Long Lost Urwerk Relative?  A 1970 Jump Hour with very familiar features
Long Lost Urwerk Relative?  A 1970 Jump Hour with very familiar featuresOf course, I'd rather have any one of these Urwerks

Long Lost Urwerk Relative?  A 1970 Jump Hour with very familiar features

Related Posts;
All Urwerk Stories
All Jump Hour Stories

Urwerk website-->Link



| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

Urwerk on Steroids - Titanium Aluminum Nitrade Coated 103.08

Urwerk on Steroids - Titanium Aluminum Nitrade Coated 103.08
Thanks to Ian, the moderator of the Urwerk Forum at Horomundi for this latest unveiling and information!

The TiAlN coated URWERK 103.08 - Harder than Steel!

TiAlN - Titanium Aluminum Nitride - treatment is well-known in industry for its exceptional properties. A TiAlN coating less than 4 microns thick has the effect of multiplying the resistance of the underlying metal to scratches, shocks, oxidation and even acids.

Its colour is dependant on the Titanium/Aluminium ratio and can range from melting bronze to stormy black.


Urwerk on Steroids - Titanium Aluminum Nitrade Coated 103.08
For the very first time URWERK present their iconic 103 with a steel case and and not just any steel an incredibly hard TiAlN-coated steel. With this new model, URWERK blurs the frontier between horological art and cutting-edge technology. The coat of the steel 103.08 is the hardest yet known in the world of haute horlogerie.

Urwerk on Steroids - Titanium Aluminum Nitrade Coated 103.08
"The TiAlN appears to have the gift of endowing supernatural properties to common metals like steel." Felix Baumgartner, master watchmaker and co-founder of URWERK

"TiAlN is a hard material which can be used as protective coating to enhance the lifetime of a variety of work pieces against mechanical or chemical attacks. The hardness of TiAlN is often between 30 and 40 GOa. In comparison, the hardness of DLC (diamond like carbon) is 20-25 GPa"
. Dr Ayat Karimi, Institute of Complex Matter Physics, EPFL, Lausanne.

While the 103.08 will not be a limited edition, only the first 50 watches will have the angular shaped crystal pictured here. After those first 50 'Launch Pieces', the shape of the crystal will revert to the standard curved shape.

Urwerk on Steroids - Titanium Aluminum Nitrade Coated 103.08
Urwerk on Steroids - Titanium Aluminum Nitrade Coated 103.08
All Posts Urwerk Related-->Link


Search for watches

| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

Horolographer Harry Tan & The Opus V

Horolographer Harry Tan & The Opus V

Harry Tan of Watching Horology has just posted a gallery of his really impressive Opus V photos here-->LINK
(watch provided by Bernard Cheong)


Related Posts;
Urwerk Hammerhead
Martin Frei of Urwerk
The Birth of Modern Horological Art
History of the Wandering Hour
Opus 7 Video
Opus 7 by Andreas Strehler
Opus 6 by Gruebel Forsey
Opus Time Bandit
Horological Machine #2
HM1
Independent Watchmakers
Haute Horology



Search for watches


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

First Hands Experience

First Hands Experience
There is a great Horomundi post by a first time Urwerk RG 103.3 customer (A lucky bloke named Stephen)-->Link

He says, "I've been collecting for 20 years and of all the watches I own, Pateks, VC, AP, Lange, Dubuis, Journe, DeBethune, etc., or have ever owned, NONE have ever created the level of excitement that this has."

Related Urwerk Posts-->Link

First Hands Experience
Also, the first Horological Machine has been delivered to customers, here is one that arrived in Singapore-->Link

Related HM1 Posts-->Link

Urwerk Photo by Stephen (SMS2)


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

Interview with Martin Frei of Urwerk

Interview with Martin Frei of UrwerkA very interesting interview of Martin Frei, the designer and co-founder of the revolutionary watch brand, Urwerk. (by Felipe Jordao) -->Link


Interview with Martin Frei of Urwerk

Related posts;
Urwerk Time Bandit
Urwerk Visit
Urwerk Hammerhead 201


| Watchismo Blog | Watchismo Shop | Email Author | Subscribe |


Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

Urwerk Time Bandit - The Opus That Never Was

An original sketch of what might have been the Opus V. Codenamed 'Time Bandit' by Urwerk's Martin Frei and Felix Baumgartner, it was an overwhelmingly difficult mechanical concept in which the wearer would engage the slot-machine style lever to activate the spinning digits and form the correct time on the side of the watch.

Even better, Felix Baumgartner describes the conundrum to Wei Koh of Horomundi/Revolution;

"You had to arm it like a slot machine. The time indications were placed on cylinders, but the watch did not show the time until you armed it. Once you released the arming lever these cylinders would turn until they stopped precisely at the right time. It was a completely crazy idea. It was really more complicated than a minute repeater; in fact, the base of this watch was essentially a minute repeater. You had a time telling base caliber and then a system of snail cams and racks like that in a minute repeater. When you armed the watch you would essentially be arming something similar to as strike barrel. But instead of translating the time into hammer strikes on gongs they would operate this one arm bandit like indication. And this indication involved a whole additional mechanism. When conceptualizing the watch we were joking that we were gambling with time, because we didn’t know if it was possible to create in a little over one year. This proved right."


Via Horomundi-->Link
The Complete Urwerk Story-->Link

The actual & highly successful Opus V
Related Urwerk Posts-->Link

Ian Skellern's video below
showing off the action of the watch


| Watchismo Shop | Watchismo Blog | Email Author | Subscribe |



Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

TO BOLDLY GO WHERE NO WATCH HAS GONE BEFORE!

TO BOLDLY GO WHERE NO WATCH HAS GONE BEFORE!
Great article by Nick Foulkes from FT about the current 'Garage Watchmakers' of todays exclusive independent boutique brands like MB&F, Urwerk, Richard Mille, Vianney Halter, Hautlence, FP Journe, HD3, and Greubel Forsey.

Article PDF-->Here


via Ian Skellern @ OurWorld
Urwerk King Cobra CC1 Reintrepretation of 1958 Patek Philippe Cobra Prototype - Cylindrical Retrograde Linear Jumping Hour DisplayUrwerk Tarantula Crawls Onto Your Wrist and Sticks its Fangs Into Your VeinsUrwerk 202 Hammerhead Automatic at 2008 SIHHLong Lost Urwerk Relative?  A 1970 Jump Hour with very familiar featuresUrwerk on Steroids - Titanium Aluminum Nitrade Coated 103.08Horolographer Harry Tan & The Opus VFirst Hands ExperienceInterview with Martin Frei of UrwerkUrwerk Time Bandit - The Opus That Never WasTO BOLDLY GO WHERE NO WATCH HAS GONE BEFORE!

Report "Watchismo Times"

Are you sure you want to report this post for ?

Cancel
×