Watchismo Times

"One of the horological highlights of Baselworld has to be the incredible rebellion T-1000 featuring 1000 hour power reserve, 6 mainspring barrels, two tiny chains, a double hairspring, titanium case and aluminum chassis."

Special thanks to Ian Skellern of UNDERTHEDIAL for his images and descriptions.


The force require to wind the T-1000 is very light and there is a tactile clicking ratchet sound as the lever is moved up and down.

On both sides of the T-1000 movement, a tiny chain distributes power between 3 barrels.



REBELLION T-1000

With a mind-blowing power reserve of more than 1,000 hours - that's more than 40 days - the T-1OOO doesn't simply push back the boundaries of the possible, it destroys them and creates its own reality.

Baselworld, March 2010 – After the successful presentation in January of The Predator, their first watch with a round case, Rebellion launched themselves into the creation of a never-before-realized challenge: creating a watch with a power reserve of more than 1,000 hours!

The T-1OOO – birth of a challenge
It was in June 2008, after the famous 24 hours of Le Mans car race, in an atmosphere rich with the smell of motor oil and hot engines, that the team at Rebellion thought, "If we can transform these fine-tuned racing thoroughbreds into 24-hour long distance endurance racers, why not do the same with a watch? Why not see just how long the power reserve could be?"
Sporting a body of pure design
The body of the T-1OOO was designed in a collaboration of Eric Giroud and Rebellion. The case was developed concurrently with the movement to ensure completely harmonious integration. There is a sensation of flying as the viewer gazes down through the massive opening to the vertical roller-borne time indications below. Attention then plunges towards 6 o'clock, where the inclined double balance releases the immense power at a precisely controlled rate. A window in the side of the case reveals one of the mainspring barrels, with markers providing a natural "Fuel Gauge" of the state of the power reserve.

Controlling the power
Housed three on each side of the body are the six mainspring barrels providing T-1OOO with its colossal energy reserve. The over-sized winding lever endows the T-1OOO with a strong and virile identity as well as an ergonomically tactile pleasure while "filling the tank". The streamlined downward taper of the case from the centre to 6 o'clock furnishes further evidence of Rebellion's car racing pedigree. A pedigree reinforced by the fact that a patented time-setting clutch activated by a push button in the crown makes setting the time as simple (and as pleasurable) as changing gears. The three rounded structures each side of the case provide a hint to the complex engineering within, while the innovative architecture of the majestic case is in perfect tune with the demand for exceptional contemporary horology.
A true racing machine
The power reserve of more than 1,000 hours is possible thanks to the six mainspring barrels that provide the T-1OOO with its exceptional capacity. In a patented system of energy distribution, six barrels are wound in parallel via a central prop shaft driving two chains, but they discharge in series (2 x 3) to optimize a regular power supply to the regulator. The technical ability behind the realization of this elegant technical solution came directly from Rebellion's long experience in endurance car racing and the Rebellion Racing team.

T-1OOO - TECHNICAL SPECIFICATIONS

• Limited edition: 100 pieces
• Calibre: REB T-1000, manual winding with integrated winding lever
• Jewels: 14 ceramic & 22 rubies
• Balance: double hairspring inclined at 39°
• Winding system: Patented system of six mainsprings wound in parallel by chain and prop shaft.
• The barrels discharge power in series to provide an optimal torque curve.
• Indications: hours and minutes displayed on rollers
• Power reserve: 1'000+ hours provided by six (2 x 3) vertical mainspring barrels
• Number of components: 693 for the chassis
• Balance frequency: 18'000 bph (2.5Hz)
• Material: case in titanium and chassis in aluminium
• Dimensions: 46,7 mm X 46,9 mm / 19,5 mm
• Crown: time-setting mechanism using patented push-button clutch system
• Water resistance: 50 metres
• Strap: black alligator leather
• Buckle: patented folding clasp with micrometric push button regulation allowing easy adjustment of length on the wrist.

Rebellion Timepieces Website


| Watchismo Shop | Watchismo Blog | Contact Us | Facebook |

2009 Harry Winston Opus 9

In Opus 9, diamonds are not merely a decorative element, but the functional element of time telling. Teamed up for the 9th Opi is master watchmaker Jean-Marc Wiederecht and haute designer Eric Giroud.

Replacing the traditional watch hands and cyclical dial, time is displayed by two parallel diamond chains, for hours and minutes.

Sleek and scintillating, each chain is adorned with 33 baguette-cut diamonds, Harry Winston’s signature shape.

Vivid mandarin garnets are strategically positioned to indicate the hours and minutes.

Meticulously calibrated, each stone is perfectly set into the links, to ensure movement, while maintaining their brilliance. The chains are designed to maximize mobility while minimizing friction.

Recalling Harry Winston’s iconic, invisible settings, the gemstones appear as floating lines of light, seamless unfolding across the dial.

Limited edition of 100 pieces

Specifications:

• Movement: Automatic self-winding using a chain system.
• Functions: Linear display of hours and minutes.
• Power Reserve: 72 Hours
• Case: White Gold
• Dimensions: 56mm x 48mm x 20mm
• Dial: Baguette diamond chain indicating the hours on left, the minutes on the right. The indicator is a Garnet.
• Water Resistance: 30 meters (3ATM)
• Carat Weight: 66 baguette diamonds, total carats: 2.148 cts. 6 Garnet, total carats: 0.222 cts.

Related Stories:

OPUS 8
OPUS 7
OPUS 6
OPUS 5

Harry Winston Website

| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |

I was lucky enough to be one of the first people in the world to see the latest from Maximilian Büsser & Friends this morning. Max and Stephen Hallock of MB&F met me for breakfast at NYC's Brasserie to unveil the coolest Horological Machines yet. I hate to use one word to describe the HM3 Sidewinder and Starcruiser, but here it is... WOW.

Summed up, this watch has two variations. The red gold Starcruiser (above) and white gold Sidewinder (below) with two sapphire cones rising up from the case to reveal hours and day/night indicator and the other cone for minutes - transmitted via ceramic ball bearings to laser-cut hands and visible as a drivers style watch, on the side. Each watch shown here displays 10:45 am.

But what really sets it apart is the fact the movement with automatic rotor is upside down! No more turning your watch over to show off its most essential element. The signature Grendizer battle axe rotor swings wildly under each dome adding to the many layers of the most dimensionally effective Horological Machine to date.

The date wheel surrounds the movement through each dome and indicated by an arrow cut into the case.

Two styles are available in both red gold and white gold. The Starcruiser has both cones on the inside of your wrist and the Sidewinder with cones vertically next to your hand. Both are read easily without turning your wrist. Great when you're driving so fast you can't take your eyes off the road...or sky.


MB&F Website-->LINK

See Also;
All Max Busser & MB&F Posts-->Link
Press release;

Horological Machine No3

Warning! Horological Machine No3 (HM3) is so far outside existing timekeeping references that it may cause sensory overload. The mind first attempts to take in the kinetically active movement, paradoxically seen in all its glory on the top of the watch and partially circumscribed by a ring of large numerals. However before that information can be processed it is assailed yet again, this time by twin cones rising majestically from the sculptured three-dimensional case. No wonder many struggle to reconcile the reality that this dynamic sculpture is actually a highly technical wristwatch that tells the time and date.


Welcome to the world of MB&F!
Individualists demand choice, so HM3 is available in two versions: ‘Sidewinder’, with cones lined perpendicular to the arm and ‘Starcruiser’, with cones in line with the arm. Each version has its own very distinct visual characteristics and each offers its own angle on telling the time.

The twin cones respectively indicate hours and minutes, with the hour cone capped by a day/night indicator. An over-sized date wheel allows for large, legible numbers with the date indicated by a neatly engraved triangle on its perimeter.
However, it is the spectacular open-air theatre presented by the finely finished movement, with its swinging battle-axe shaped automatic rotor and fast oscillating balance wheel, which mesmerises the eye and astounds the senses.
Turning the watch over reveals the technical secret behind HM3’s inverted movement: two large high-tech ceramic bearings efficiently transmitting power up to the cones and date wheel.

After decades learning and conforming to the corporate rules of watchmaking, Maximilian Büsser broke the chains and started a rebellion - a rebellion called MB&F. MB&F is an artistic and micro-engineering concept laboratory in which collectives of independent horological professionals are assembled each year to design and craft radical Horological Machines.
The ramifications of these audacious projects are profound. Respecting tradition but not shackled by it, MB&F fuses traditional high-quality watchmaking with cutting-edge technology to create three-dimensional kinetic sculptures.

Horological Machine No3 is the third chapter in the story of MB&F’s horological revolution; it is a story of adventure, of excitement and of passion.

“The Earth is a cradle of the mind, but we cannot live forever in a cradle.”
-Konstantin E. Tsiolkovsky, Father of Russian Astronautics, 1896.
Inspiration and Realization: Horological Machine No3 was developed to display the machine’s beautifully finished movement in operation. Harmoniously crafted bridges, rapidly oscillating balance wheel, gearing and distinctive battle-axe shaped automatic winding rotor are all open to view. This allows the wearer to fully appreciate the art and craft that makes up HM3 and draws the viewer’s gaze inside the highly complex machine; a machine comprising more than 300 fine-finished, high-precision components.

The movement of HM3 has been literally turned upside down to allow for an uninterrupted panorama of the solid gold winding rotor’s graceful arcs and the high-speed oscillations of the balance wheel. Jean-Marc Wiederrecht, winner of the inaugural award for Best Watchmaker at the 2007 Grand Prix d’Horlogerie de Genève, was entrusted with turning the drawings and designs of Max Büsser and designer Eric Giroud into horological reality and, with his team at Agenhor, he not only met but surpassed the challenge.


Starcruiser and Sidewinder: MB&F’s Horological Machines are for individualists who demand art, craft, excellence, exclusivity . . . and choice. To cater to these demanding aficionados, Horological Machine No3 is available in two versions: ‘Sidewinder’, with its cones lined perpendicular to the arm and ‘Starcruiser’, with its cones in line with the arm. Just like their potential owners, each is very special, each is very different.


Indications: The three-dimensional time-indicating cones allow for telling the time at a glance, whether driving or typing; however, the fact that nothing like them had ever been attempted before in horology posed considerable challenges. The top caps of the truncated cones are brazed (not glued) to ensure maximum water-resistance and the red ‘hands’ of the hour and minute indicators had to be cut by laser to obtain the incredibly high precision with minimum mass that the design necessitated.

The over-sized date wheel is actually a larger diameter than the movement, a fact that allows for very legible and well spaced 2.5mm high numbers. A neat triangle engraved into the top of the case marks the date.


Mystery Rotor: the prominence of the 22K solid gold battle-axe shaped rotor on the dial of HM3 is certain to increase the recognition of this already iconic MB&F symbol. The rotor is a ‘mystery’ because it appears to defy the laws of physics in being symmetrically balanced instead of having a visibly off-centred mass. This is achieved by machining the underside of one arm to a razor-thin edge so reducing its mass.

“The knack of flying is learning how to throw yourself at the ground and miss.”
-Hitchhikers Guide to the Galaxy

Horological Machine No3
Technical Innovations:

Ceramic Bearings: Time indications are usually located on the top, or dial side, of a movement. As the movement of HM3 is inverted to display its operation, an efficient solution was needed to bring power from the bottom of the movement to the timekeeping cones and date wheel at the top. Standard pinions set in jewels would have required complex, friction-generating gearing, and would require support top and bottom – a factor which would increase the height of the movement, and thus the watch. So instead of standard jewelled pinions, HM3 features two large-diameter (15mm) high-tech ceramic bearings. These minimize the number of gear-wheels (and thus friction) because of their large diameter and, as they only require support at one end (the base) due to the rigidity resulting from their ultra-high precision design and manufacture, they allow for a thinner movement.

Large Date: The over-sized date ring has a diameter larger than the movement. While the design allows for large (2.5mm high) easy-to-read numbers, the considerable distance between each number, while aiding legibility, required great ingenuity in enabling the date to be adjusted. Technical constraints in using the crown to operate the date meant that a pusher was called for; however, a pusher has an approximate travel of only 1mm – far short of the 4mm needed to move the date wheel from one day to the next. An ingenious system of amplifying the pusher’s travel was developed using efficient gearing to multiply by four the distance travelled by the pusher.


Sapphire cones: Three-dimensional cones have never been used to display time before, and no wonder as their manufacture was said to be impossible. Fortunately the impossible just took a little longer. The difficulty lay not in actually fabricating the cones, but in polishing the interior of their (originally) translucent surface until transparent. The caps of the truncated cones are brazed (a high temperature soldering technique) to their gold rims, a technique which is aesthetically pleasing and ensures a solid and waterproof construction.

Screw heads: Perfection lies in the details, form follows function. Those two statements explain both the reason MB&F has gone to the effort of redesigning the slots of the case screws and their unusual cloverleaf shape. Sharp-edge shaped screw slots require sharp-edge shaped screwdrivers, a tool tailor-made for scratching polished gold screws. The rounded cloverleaf pattern in the head of HM3 screws is not only pleasing to the eye, it reduces the chances of damage to the screw. Horological Machines are micro-mechanical works of art and demand that each and every component both looks superb and functions impeccably.

Case and finish: Though totally original in design, the double indications, idiosyncratic play of matt and polished finished surfaces, iconic mystery rotor and slope-sided case ensure that HM3 is unmistakeably, 100 per cent pure Horological Machine.

"Traveling through hyper-space ain't like dustin' crops, boy."
Han Solo in Star Wars


Horological Machine No3 – Technical Specifications

Movement:

Three-dimensional horological engine designed by Jean-Marc Wiederrecht/Agenhor;
Girard-Perregaux oscillator and gear
Balance oscillating at 28,800 bph.
22k rose gold battle-axe shaped ‘mystery’ automatic winding rotor
Hour and minutes information transmitted via ceramic ball bearings to laser-cut hands.

Number of jewels: 36 (all functional)
Number of components: 304

Functions:

Hour and day/night indicator on one cone
Minutes on second cone
Date around the movement

Case:

2 versions: Starcruiser (cones in line with arm)
Sidewinder (cones perpendicular to arm)

Both versions available in 18k white gold/ titanium or 18k red gold/titanium.
Screwed-down crown
Dimensions (exclusive of crown and lugs): 47mm x 50mm x 16mm
Number of case components: 53 - Starcruiser , 57 - Sidewinder

Sapphire crystals:

Cones and both display backs with anti-reflective treatment on both faces.

Strap & Buckle:

Black hand-stitched alligator with 18k gold and titanium custom designed deployment buckle.


'Friends' responsible for Horological Machine No3

Concept: Maximilian Büsser/MB&F

Product Design: Eric Giroud – Eric Giroud Design Studio

Technical and Production Management: Serge Kriknoff/MB&F

Movement Development: Jean-Marc Wiederrecht/Agenhor, Nicolas Stalder/Agenhor

Movement manufacturing: Georges Auer/Mecawatch, Salvatore Ferrarotto/APR Quality

Ceramic ball bearings: Patrice Parietti/MPS

Movement assemblage: Didier Dumas/MB&F, Gilles Dalloz/Agenhor

Case and buckle construction and production: Philippe Marti, Dominique Mainier and Stéphane Lhomme of G.F.Châtelain

Sapphire cones: Sébastien Sangsue and Grégory Esseric/Sebal, Peter Bloesch/Bloesch

Dials: François Bernhard and Denis Parel of Nateber

Hands: Pierre Chillier, Isabelle Chillier and Félix Celetta of Fiedler

Strap: Olivier Purnot/Camille Fournet

Presentation case: Frédéric Legendre/Lekoni, Isabelle Vaudaux/Vaudaux

Communication:

Graphic Design - Alban Thomas and Gérald Moulière of GVA Studio
Product Photography - Maarten van der Ende
Display Architecture - Frédéric Legendre/Lekoni
Portrait Photography - Régis Golay/Federal
Webmasters - Stéphane Balet and Guillaume Schmitz of Sumo Interactive
Texts - Ian Skellern
Project Manager - Estelle Tonelli/MB&F

MB&F - The Genesis of a Concept Laboratory

The projects that gave Maximilian Büsser the most pleasure and personal satisfaction during his seven year tenure as head of Harry Winston Timepieces, were those working with talented independent watchmakers on the exciting Opus series watches. An idea for his own personal utopia emerged; that of creating a company dedicated solely to designing and crafting small series of radical concept watches in collaboration with talented professionals he both respected and enjoyed working with. The entrepreneur in Büsser brought the idea to reality.

MB&F is not a watch brand, it is an artistic and micro-engineering concept laboratory in which collectives of independent horological professionals are assembled each year to design and craft radical Horological Machines. Respecting tradition without being shackled by it enables MB&F to act as a catalyst in fusing traditional high-quality watchmaking with cutting-edge technology and avant-garde three-dimensional sculpture.

MB&F is independent people creating for independent people.

Biography– Maximilian Büsser

Maximilian Büsser was born in Milan, Italy, before moving at an early age to Lausanne, Switzerland where he spent his youth. Growing up in a multi-cultural environment and family - his father was a Swiss diplomat who met his mother, an Indian national, in Bombay - led Büsser to develop a cross-cultural broad-based approach to his life and to business.

In July 2005, at the age of 38, Maximilian created the world’s first horological Concept Brand: MB&F (Maximilian Büsser & Friends) in which he is now partnered with Serge Kriknoff. Büsser's dream with MB&F is to have his own brand dedicated to developing radical horological concepts by working in small hyper-creative groups composed of people he enjoys working with. MB&F presented its first timepiece, Horological Machine No. 1 (HM1), in 2006and followed that up with HM2 in 2007 and HM3 in 2008, and Büsser has more radical machines in the development pipeline.

Entrepreneurship is Maximilian Büsser's forte. In 1998 and only 31 years old, he was appointed managing director of Harry Winston Rare Timepieces in Geneva. During his seven years there Büsser developed the company into a fully-fledged and well respected haute horlogerie brand by developing the strategy, products, marketing and worldwide distribution, whilst integrating design, R&D and manufacturing in house. The results were a 900% increase in turnover and the positioning of Harry Winston as one of the leaders in this very competitive segment.

Prior to Harry Winston, Maximilian Büsser's love for high-end horology was strongly imprinted by his first employer, Jaeger-LeCoultre. During his seven years in the senior management team during the 1990s, JLC strongly increased its profile and multiplied its turnover by a factor of ten. Büsser's responsibilities at Jaeger-LeCoultre ranged from Product Management & Development to Sales & Marketing for Europe.

Maximilian graduated in 1991 with a Masters in Micro technology Engineering from the Swiss Federal Institute of Technology, Lausanne.


MB&F Website-->LINK

See Also;
All Max Busser & MB&F Posts-->Link

| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |

One of the very first owners of a MB&F Horological Machine No.2 has shared his images and thoughts-->Link

"It’s an object which I can’t stop staring at. It is anything but tactile (unlike the HM-1 which was all in curves) but I can’t stop touching it."


See Also;
All MB&F Horological Machine Posts-->Link


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |

Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

Sure, I feel guilty looking at the HM2 in a very private moment. But I just can't help myself, it's a damn nice looking watch!

Within a week of being publicly exposed in full-frontal glory, the MB&F "Horological Machine N°2" can only be seen with these advance elemental photographs. Showing the crown (with the iconic HM2 "battle axe" rotor design on it), a portion of one display and at least two indications, and what appears to be some sort of bad-ass futuristic motorcycle engine! We shall see...stay tuned.

The case alone is made up of 102 different coponents, setting itself as one of the most, if not THE most complex watch cases ever made. Max mentioned to me that the case construction is inspired by a game he used to play as a kid… called Meccano, where parts are bolted together (similar to Erector sets).


All Related MB&F Post Links;
MB&F HM2 Friends Photo
MB&F HM2 Movement
Max Busser Interview
Early Designs & Sketches of the HM1
Horological Machine No 1


Enter The Watchismo Times 1st anniversary vintage chronograph giveway!-->LINK


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |

Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner

It's just about blast-off time for the next Horological Machine of Maximilian Büsser & Friends. Max has just sent me the official team portrait (a new crew is assembled for each machine) and as many of you know, this is the second landing for the the MB&F brand and we're all less than a two weeks away from seeing their craft!

Yeah, way too many space travel references, I know. But you gotta admit, the HM2 does look other-worldly, based solely on the advance viewing of the movement a while back. Still, nobody really understands where this might be going. (see the HM2 movement below) One thing is certain, the HM2 is likely to wear you, not the other way around.

And nobody really knew who he was working with on this latest project...until now. Max described it as "A truly incredible adventure with a wonderful team. Few of these great artisans-creators have had any media limelight at all, even Jean-Marc Wiederrecht who is probably the most prolific movement creator of the last fifteen years, but who is so shy of publicity that the biggest problem was to convince him to appear openly on this project, has rarely been seen at all!"


Read more about the reclusive watchmaker Jean-Marc Wiederrecht here-->Link
Maximilian Busser & Friends website-->Link

Related Posts;
HM2 Movement
All other MB&F posts


Enter The Watchismo Times 1st anniversary vintage chronograph giveway!-->LINK


| Watchismo Blog | Watchismo Shop | Contact Us | Subscribe |

Subscribe to The Watchismo Times
Enter your email

Delivered by FeedBurner